Intake CB125 configuration. Opening is 27.1mm, mounting holes are 6.2cm apart and the bolt studs are 4.8cm apart center to center ... More Details

Intake CG125 Configuration. Opening is 27.3mm, mounting holes are 6.2cm apart and the bolt studs are 4.8cm apart center to center ... More Details

This Intake Manifold is 27mm and applies to (but is not limited to) 27mm carburetors. Opening is 27.7mm, mounting holes are 6.2cm apart and the bolt studs are 4.8cm apart center to center ... More Details

Intake JH125 Configuration. Opening is 27.3mm, mounting holes are 6.2cm apart and the bolt studs are 4.8cm apart center to center. ... More Details

Intake CG150 Configuration. Opening is 28.2mm, mounting holes are 6.2cm apart and the bolt studs are 4.8cm apart center to center ... More Details

This intake manifold is most commonly (but most exclusively) used for GY6 Engines, most commonly for CF Moto and similar brand machines. This engine is most commonly used gas scooters, as well as dir... More Details

This intake manifold is designed to work with 26mm to 27mm carburetors in 4-stroke machines. It will fit many 125cc to 200cc engines in ATVs, Dirt Bikes, and Scooters. Commonly used in conjunction wit... More Details

This intake manifold is designed to work with 30mm carburetors in 4-stroke machines. It will fit many 200-250cc engines in ATVs, Dirt Bikes, and Scooters. Commonly used in conjunction with a PZ30 carb... More Details

This intake manifold is designed to work with 30mm carburetors in 4-stroke machines. It will fit many 200-250cc engines in ATVs, Dirt Bikes, and Scooters. Commonly used in conjunction with a PZ30 carb... More Details

Intake CG200 Configuration. Opening is 30mm, mounting holes are 6.2cm apart and the bolt studs are 4.8cm apart center to center ... More Details

This intake manifold is most commonly (but most exclusively) used for the Jianshe 400cc JS400 ATV. Corresponding O-ring (F3-700601-0) is our part number 20A5772. Product Specifications: Mani... More Details

This intake manifold (aka joint carburetor) is typically found in Cylinder Head or Cylinder Head Sub Assembly section of several part manuals. Commonly used for but not limited to CF188 / 500cc engine... More Details

This carburetor intake manifold is typically found in the Cylinder Head Assy / Cylinder Cover Assy (2) / Cylinder Head Comp. section of several part manuals. Commonly used for but not limited to wate... More Details

Inlet pipe joint. Commonly used for (but not limited to) 400cc and 500cc engines, such as the Hisun 500cc 4x4 ATVs and Hisun 400cc UTVs, as well as many other clones, rebrands and similar displacement... More Details

Intake - Yamaha PW50 ... More Details

This is a standard Intake and Exhaust Valve for 125cc 4-stroke engines. Fits many 125cc ATVs, Dirt Bikes, Scooters, and more. Approximate dimensions: Intake Diameter: 28mm Exhaust Diamete... More Details

This is a standard Intake and Exhaust Valve for 150cc 4-stroke engines. Fits many 150cc ATVs, Dirt Bikes, Scooters, and more. Approximate dimensions: Intake Diameter: 30mm Exhaust Diameter:... More Details

This is a standard Intake and Exhaust Valve for 200cc 4-stroke engines. Fits many 200cc ATVs, Dirt Bikes, Scooters, and more. Approximate dimensions: Intake Diameter: 32mm Exhaust Diameter... More Details

This is a standard Intake and Exhaust Valve for 250cc 4-stroke engines. Fits many 250cc ATVs, Dirt Bikes, Scooters, and more. Approximate dimensions: Intake Diameter: 34mm Exhaust Diameter... More Details

This is a standard Intake and Exhaust Valve for 50cc 4-stroke engines. Fits many 50cc ATVs, Dirt Bikes, Scooters, and more. Approximate dimensions: Intake Diameter: 18mm Exhaust Diameter:... More Details

This is a standard Intake and Exhaust Valve for 70cc to 110cc 4-stroke engines. Fits many 70cc to 125cc ATVs, Dirt Bikes, Scooters, and more. Approximate dimensions: Intake Diameter: 23mm E... More Details

This is an Intake and Exhaust Valve for GY6 style 125cc 4-stroke engines. Approximate dimensions: Intake Diameter: 27mm Exhaust Diameter: 23mm Total Length: 65mm ... More Details

This is an Intake and Exhaust Valve for GY6 style 150cc 4-stroke engines. Approximate dimensions: Intake Diameter: 27mm Exhaust Diameter: 23mm Total Length: 65mm ... More Details

This is an Intake and Exhaust Valve for GY6 style 50cc 4-stroke engines. Approximate dimensions: Intake Diameter: 18.6mm Exhaust Diameter: 16mm Total Length: 64mm ... More Details

Paper Intake Manifold Gasket (1 piece). It is most commonly used for (and not limited to) GY6 style 150cc ATV, Dirt Bike, and Scooter engines. Gasket set has a overall length of 58mm, 39mm wide, 4mm t... More Details

Intake gasket applies to (and is not limited to) 150cc to 400cc engines. Most commonly used for 260cc and 300cc ATVs, dirt bikes, scooters, buggies and other motorized vehicles from a wide range of ... More Details

Intake Manifold Gasket. It is commonly used for (and not limited to) 200cc to 250cc ATV, Dirt Bike, and Scooter engines. Includes one plastic gasket. Gasket set has a overall length of 61mm, 44mm wide... More Details

Paper Intake Manifold Gasket (1 piece). It is commonly used for (and not limited to) 200cc to 250cc ATV, Dirt Bike, and Scooter engines. Includes one plastic gasket and one paper gasket. Gasket set ha... More Details

Intake gasket for (but not limited to) 300cc, 400cc, 500cc and 550cc ATVs, UTVs, dirt bikes, scooters, dune buggies, go karts and other powersports/mobility products. Manufacturer part number 2.1.01.0... More Details

Intake Manifold Gasket 3 piece set. Includes one plastic gasket, one paper gasket, and one rubber O ring. It is most commonly used for 125cc Electric Start and Kick Start Engines. Gasket set has a ov... More Details

Intake Manifold Gasket 2 piece set. It is most commonly used for (and not limited to) GY6 style 150cc ATV, Dirt Bike, and Scooter engines. Includes one plastic gasket and one paper gasket. Gasket set ... More Details

Intake Manifold Gasket 2 piece set. It is commonly used for (and not limited to) 125cc to 200cc ATV, Dirt Bike, and Scooter engines. Includes one plastic gasket and one paper gasket. Gasket set has a ... More Details

Intake Manifold Gasket 2 piece set. It is commonly used for (and not limited to) 200cc to 250cc ATV, Dirt Bike, and Scooter engines. Includes one plastic gasket and one paper gasket. Gasket set has a ... More Details

Intake air temperature / pressure sensor. Commonly used for (but not limited to) 400cc, 500cc, 700cc and 800cc engines, such as the Hisun 400cc, Hisun 500cc, Hisun 700cc and Hisun 800cc 4x4 ATVs and H... More Details

Intake valve for (but not limited to) 150cc to 400cc ATV's, dirt bikes / pit bikes and scooters. Manufacturer part number 2.1.01.0440. Applies primarily to (but not limited to) Buyang 300cc 4x4 ATV, ... More Details

Intake Valve. This is a very common profile and is used for (but not limited to) many big brand and lesser brand name machines from all over the world. Common format for many machines in the 250cc r... More Details

This 31mm intake valve is commonly used for a wide range of ATVs and UTVs. Most popularly applies to the Odes and Kangdi (Kandi) 800cc UTVs. Common Odes model names consist of variations of "Ode... More Details

30mm intake valve. Commonly used for (but not limited to) 700cc engines, such as the Hisun 700cc 4x4 ATVs, as well as many other clones, rebrands and similar displacement machines. These machines a... More Details

40mm intake valve. Commonly used for (but not limited to) 400cc and 500cc engines, such as the Hisun 400cc and Hisun 500cc 4x4 ATVs and Hisun 400cc UTVs, as well as many other clones, rebrands and sim... More Details

32mm intake valve. Commonly used for (but not limited to) 800cc engines, such as the Hisun 800cc UTVs, as well as many other clones, rebrands and similar displacement machines. These machines are c... More Details

Intake valve / Inlet valve commonly (but not exclusively) used for 600cc, 800cc, 1000cc and 1100cc engines. Applies to many brands and displacements of ATVs, UTVs and buggies. Popularly used in th... More Details

Key blanks / blank keys - 2pcs ... More Details

Key blanks / blank keys - 2pcs. Commonly (though not exclusively) used for scooters, GY6 and other formats. ... More Details

Kick stands for all dirt bikes 50cc to 300cc ... More Details

Kick stands for all dirt bikes 50cc to 300cc ... More Details

Kick stands for all dirt bikes 50cc to 300cc ... More Details

Kick stands for all dirt bikes 50cc to 300cc ... More Details

Kick stand (kickstand), 122mm HRA-15 profile. Direct replacement for SHOK Scooters Fusion hybrid e-bike/e-scooter as well as many other brands and models in the open market. ... More Details

Kick stand (kickstand) assembly. Direct replacement for SHOK Scooters Neutron kick scooters as well as many other brands and models. ... More Details

Kick stand (kickstand). Attaches to the mounting plate on the scooter body. Mounting plate sold separately. Direct replacement for SHOK Scooters Proton kick scooters as well as many other brands and m... More Details

Kick stand and foot peg assembly for all dirt bikes 50cc to 300cc ... More Details

Kick stand and foot peg assembly for all dirt bikes 50cc to 300cc ... More Details